Box Blades & Graders in Centerville, TX

The box blade itself matters less than matching its width to your tractor's horsepower and lift capacity. A small compact tractor pulls a narrower blade just fine on tight pasture edges. A bigger tractor handles a wider blade across open ground. Property size doesn't set the rule by itself. What you're moving does. Grading a driveway, filling ruts or leveling a building pad all call for different widths. The makers' manuals also want a ROPS-equipped tractor with the seat belt fastened. Come by our Normangee store and ask which box blade or grader fits the tractor you run.

Drop them for hard ground and lift them for finish work. The scarifier teeth sit in front of the blade. Set them down a notch or two, and they rip packed dirt or old gravel so the blade can move it. On loose dirt, raise them out of the way. Most box blades set tooth depth with pins through the shanks. Adjust the tractor's top link too. Shortening it tips the blade forward to cut harder. Lengthening it lets the blade float. Start shallow. You can always go deeper on the next pass.

Yes, that's exactly what a box blade is built for. Ruts, washouts and uneven spots are what the cutting edge and side plates are made to handle. The blade cuts down high spots and drags that dirt into the low spots next to it. It smooths rough pasture ground that your mower or loader bucket can't. Leon County pasture takes a beating from equipment traffic, cattle and weather. So that kind of ground turns up a lot. Once the big ruts are filled, a grader can finish the surface flat and even.

Start with how rough the surface is right now. That's the key question. If your driveway has potholes, washboard ruts or low spots that hold water, a box blade is the tool to fix that first. It cuts and moves enough dirt to rebuild the shape of the road. Once the base is solid and mostly flat, a grader finishes the job. It rides over the surface, skims the high spots and leaves it smooth and level. Clay and sandy roads in Leon County hold up better with regular grading than with ruts left to set in.

Yes, a box blade spreads gravel well. Have the gravel dumped in several piles along the drive, not one big heap. Raise the teeth so they don't dig into the base. Pull the blade through each pile and carry the rock out ahead of you. Back-drag to even it out. Keep a slight crown down the middle so water runs off to the sides. Leon County clay and sandy roads both hold up better with a good crown. Go light. Thin, even layers pack down better than one thick one, and you'll keep more rock on the drive.