Loaders & Backhoes in Hearne, TX
Loader work for Hearne, TX acreage starts at our Bryan store, down Highway 6.
Loaders & Backhoes for Hearne
Our Bryan store is a Bad Boy store. On a Bad Boy, the front loader quick attach is part of the tractor itself. Bad Boy builds the tools that go on it: front grapples, pallet forks and hay spears. A backhoe is available for the Bad Boy 1025, model BBH105, through our Bryan store. Running another tractor? Call and ask what fits it. Robertson County runs from pasture to river bottom fields to cattle country. A grapple clears brush. Forks move feed and fencing. Browse our implements on j5tractors.com before you drive.
A front loader scoops, lifts, and carries dirt and debris on your place, while a backhoe digs and trenches for jobs a loader alone can't handle. A loader handles the everyday work: moving dirt, stacking hay, and clearing brush. A backhoe takes on the deeper jobs, like setting posts, digging a pond edge, or running a line to the barn. Both fit most brands of tractor. That's a lot in one hookup. Our parts counter carries pieces for these attachments, and our service department handles repairs when something breaks. You don't have to guess what fits your tractor. Browse our implements on j5tractors.com to find the right attachment for your place.
- Move dirt, gravel, and hay bales without extra trips across your place
- Dig post holes, trenches, and pond edges with a backhoe attachment
- Clear brush and level rough ground with a front loader
- Match a loader or backhoe to your tractor
- Turn to our parts counter and service department after the sale
The J5 store that serves Hearne

J5 Tractors Bryan
About 21 miles by road from Hearne
5956 E State Hwy 21, Bryan, TX 77808
(817) 767-1150Mon-Fri 8:00am-5:00pm, Sat 8:00am-12:00pm
Carries: Bad Boy tractors, implements and mowers; Mahindra ROXOR side-by-sides
Questions people ask
Can I find used loader attachments for a Hearne place on the Bryan lot?
It depends on the week. Our lot changes as machines sell. To ask about a used grapple, pallet fork or hay spear, call the store or stop by in Bryan. You can also browse our implements on j5tractors.com to see what's listed. Buying used? Look over the pins, bushings and hydraulic hoses before you decide. Worn pivots and weeping fittings tell you how hard a piece has worked. Check the mount against your loader's quick attach too. A used attachment that doesn't fit your loader won't do you any good.
How do I keep a loader or backhoe attachment in good shape?
Grease the pins and bushings often, and every day you run it hard. Check hydraulic hoses and fittings for cracks or weeping before a long day. Look over the bolts on the quick attach each time you swap tools. Robertson County ground has its share of roots, stumps and ruts. That kind of work adds up on grapple tines and fork tips. Your attachment's manual gives the intervals, and that's the schedule to follow. Our Bryan shop works on tractors, implements and mowers. If something's wearing wrong or a hose starts seeping, call the store.
Who handles repairs on a grapple or forks once they're on my Hearne tractor?
Our Bryan shop does. It works on tractors, implements and mowers, and that includes grapples, forks and other loader attachments. The parts counter there handles pins, bushings, cutting edges and hydraulic fittings. That covers the 1025's backhoe too. Bring the tractor and attachment in, or give us a call to describe what you're seeing. Grapple tines and pivot pins take the most wear on brush work. A loose pivot is worth catching early. You don't want it failing with a load up.
Does a grapple need an extra hydraulic circuit on my tractor?
A grapple does. Its jaws open and close on their own cylinders, so your loader needs a spare hydraulic circuit to run them. Pallet forks and hay spears don't need one. They just ride on the loader's own lift and tilt. Check the mounting plate on the front of your loader too, and how an attachment locks on. Then check what the loader can lift, since a grapple full of brush or a pallet of feed adds up. The loader's manual lists its lift capacity. Bring your tractor and loader make and model when you stop by our Bryan store.
What's the difference between what a loader does and what a backhoe does?
A loader lifts and carries. With a grapple, forks or a hay spear on it, it moves brush, feed, fencing and round bales around the place. A backhoe digs. It's built for post holes, a trench for a water line, footings or a stock tank. You'll likely want both at different times. Robertson County ground mixes pasture, river bottom fields and cattle country, so both jobs come up. Loader attachments come from our Bryan store. A backhoe is available there too for the Bad Boy 1025, model BBH105. Running another tractor? Ask the Bryan store what fits it.
On our tractors site
Every implement needs the right tractor in front of it. For Hearne, see:
Not in Hearne? See Loaders & Backhoes across east and central Texas for every town we serve.
Also serving nearby
Our Bryan store serves Hearne for loader attachments, with Calvert and Mumford nearby. Hearne sits in Robertson County, where pasture, hay ground and cattle work keep a grapple or a set of forks busy. Highway 6 is the road from Hearne to Bryan. That's the whole drive.




