Box Blades & Graders in Hempstead, TX

A box blade moves dirt, and a grader skims it. The box blade has a blade up front and side walls that hold material as you drag it. It's built to cut, carry and dump soil to fill ruts or level a driveway. A grader rides over the ground and skims high spots into low spots as you pull it along. It doesn't hold much dirt. It just moves a thin layer and levels as it goes. Filling holes or moving a real pile of dirt? Use the box blade. Smoothing a pasture or a pad before grass or gravel goes down? The grader's your finish tool.

That depends on the size of the implement, not just your acreage. Size matters more than acreage alone. A smaller compact tractor handles a narrower box blade just fine on a few acres. A bigger stretch of ground, anywhere from a few acres to fifty or more, usually calls for more horsepower and a wider blade. That'll cover ground in fewer passes. The three-point hitch and the tractor's weight matter as much as the horsepower number. Some box blade makers' manuals want at least a fifth of the combined tractor and implement weight on the front wheels. Tell the store what ground you're working and what tractor you run. Call our Navasota store and talk through what fits before you buy.

Yes, that's exactly what a box blade is built for. Drag it over a rutted driveway or a low spot in the pasture. The blade cuts into the high ground and carries loose dirt into the low spots as you go. A few passes fix most ruts. You'll fill holes left by standing water and clean up a worn path without bringing in new material. Leveling ground before you lay gravel or build a pad? A grader can finish that job once the big ruts are gone. Waller County ground takes a beating from wet weather and heavy equipment. Come take a look at our Navasota lot. It changes, so call the store if you want to check on a specific size.

For a small pad or driveway, a box blade alone often does the job. It cuts down high spots and fills in low ones in the same pass. A bigger area is different. Before you pour a slab, lay a gravel pad or smooth a wide stretch of pasture, a grader finishes flatter. It skims. It doesn't dig. Order matters here. Run a box blade first to move the big dirt, then follow with the grader to finish it smooth. Waller County clay and sandy loam both hold ruts after rain, so you'll use either tool more than once. Browse our implements on j5tractors.com, or ask our Navasota store which one fits your project.

Yes. A pass before first cutting knocks down ruts, mole hills and rough spots that make an even cut harder. A smoother field also means less wear on the equipment you pull over it. Deep washouts won't level in one pass. You'll want a few passes over the roughest ground. Give the field time to dry out after wet weather before you run anything over it again. On a bigger field, a grader can follow behind to finish the surface flat. Then you're not fighting rough ground all season. Waller County pasture takes a beating from spring rain, so check the ground before first cutting each year. Ask our Navasota store which size fits your acreage.