Loaders & Backhoes in Huntsville, TX

Yes, our Conroe store sells used equipment alongside new, and that can include loaders and backhoe attachments. The best way to know what's there is to call the store or come take a look. A used backhoe still digs post holes and trenches around Walker County. A used loader moves brush, gravel and fill the same way a new one does. Check the pins, hoses and mount on any used piece before you buy. Then ask about a specific unit.

It starts with the basics: grease the pins and bushings, and check hydraulic hoses and fittings for wear. Walker County clay and grit work into pivot points over time, so it's worth a quick look before and after a job. The operator's manual for your attachment gives the exact service intervals to follow. Stick to those. The shop works on loaders and backhoes. Ask about a specific wear issue or a part that needs checking. Catching a worn pin or a leaking hose early keeps a bigger repair off your schedule. It's a lot less hassle than a breakdown mid-job.

Our Conroe parts counter and service department do. They stand behind a loader or backhoe after you buy it. The counter handles wear items like pins, bushings and hydraulic fittings. The shop handles repair work when something needs more than a quick fix. That's true whether you bought new or used. Walker County ground puts plenty of hours on an attachment between clearing, digging and moving material. When a hose lets go mid-job, you'll know where to call. Keep the make and model handy for that call.

Either attachment is sized to the tractor you run, not to one brand. Most fit a range of tractor sizes and hitch styles. The fit comes down to your tractor's horsepower, hitch type and hydraulic setup. A loader also needs mounting brackets made for your tractor model. Bring the make and model when you call, or stop by with those details, and ask what matches. Your tractor might be a compact on a few acres or a bigger utility tractor on pasture and timber ground. Sizing varies a lot.

It depends on whether you're moving material or digging. A loader scoops, lifts and carries. It pushes brush, gravel, dirt or feed from one spot to another. A backhoe digs below ground level. It opens a hole for a post or a trench for a water line, and then you backfill it. On a timber tract, clearing usually comes before digging, so the loader tends to prove itself first. Fencing a new pasture? That's where the backhoe comes in. Many tractors can carry both and swap between jobs. Not sure which comes first on your place? Call the Conroe store and talk it through.