Loaders & Backhoes in Normangee, TX

A loader lifts and carries. Mount it on the front of the tractor and it moves round bales, dirt, gravel and brush piles. A backhoe attaches to the back and digs. It's the tool for post holes, a trench for a water line, a stock tank and pulling stumps. You can run one at a time. Or carry both and swap as the job changes. If you're clearing new ground, the backhoe does the digging. If you're moving hay or feed, the loader carries the load. Come by our Normangee store or browse our implements online to see what pairs with your tractor.

In many cases, yes. Implements get matched to a tractor's size and hookup type, so it depends on what you're running now. A backhoe needs the right hydraulics and a frame built to carry the weight. Bring in your tractor's make and model, or call the store to ask what backhoe or loader options fit it. A backhoe attachment puts digging work on the tractor you already have. Mahindra offers a backhoe as an attachment, too. Browse our implements online for a look, then come in with your tractor's details.

Used loader and backhoe attachments show up on our lot from time to time. What's there changes, so the best way to check is to call the Normangee store or browse our implements online. A used attachment is worth a look in person. Check the hydraulic hoses, and the pins and bushings for wear. Look at the cutting edge or bucket for cracks. Ask how it was used. Ask what tractor it ran on. Pairing a used attachment with the tractor you run matters as much as it does with a new one. Come by the store on FM 39 to look one over.

Grease the pins and moving joints often. Do this especially if you're using the loader or backhoe several times a week. Check hydraulic hoses and fittings for leaks before every job. Keep the cutting edge, bucket teeth, or backhoe bucket sharp and clear of heavy wear. Replace them before they wear through. Look at pins and bushings for play. Loose pins wear a frame faster than the work itself. Dirt and mud work into joints fast on wet ground, so wash it down when you can. Our service department works on loaders, backhoes and other implements.

Yes. The shop works on loaders, backhoes and other implements. Our parts counter handles the wear items: pins, bushings, hoses, cutting edges and bucket teeth. Buying and servicing a loader or backhoe at one store means you know where to go for both the machine and the part it needs. That's handy in hay season. When something wears, note what you saw, like where a leak shows up or which joint feels loose. Then give us a call. You'll have a better conversation with that detail in hand.