Box Blades & Graders in Tomball, TX

Width follows your tractor's hitch category and horsepower more than your acreage. Box blades and graders come sized for tractors from compact up to full-size. Width matters most. A small compact tractor handles a narrower blade just fine for a driveway or pad. A bigger tractor pulls a wider blade across more ground in a single pass. Check that the blade's hitch category matches your tractor's three-point hitch, too. Browse our implements on j5tractors.com to compare sizes. Call the store if you'd like to talk through what fits the tractor you run.

They're different tools. A box blade cuts, scoops, and moves dirt. A grader finishes the surface flat once that heavy work is done. Side plates and sometimes shanks on a box blade let it break up hard ground, scrape down a high spot, and carry dirt into a low one. A grader skims. It doesn't dig. It rides over the ground and skims off small bumps for a smoother, flatter surface. Run a box blade first to move dirt where it needs to go. Then follow with a grader to finish a drive, pad or food plot flat. Both hook to a three-point hitch and fit most brands of tractor, including the one you run. Browse our implements on j5tractors.com to see both up close, or call the store with questions about your tractor.

Box blades fix washboard and ruts by cutting down the ridges and pushing that dirt into the low spots next to them. That's the job. Run it over a rutted stretch a few passes, angling the blade to move material where you need it, and the drive levels out. Gravel and native dirt drives around Tomball take a beating from heavy rain, and clay soil holds onto ruts once they form. A box blade's a solid first tool to knock that back down before it gets worse.

Yes, most box blades adjust. The blade can tilt and angle so you can grade a crown into a drive for water runoff, or dig deeper on one side. Run it flat for a finish pass. Side plates on some models move in or out to pull in more dirt or cut a path through a wider area. A grader works differently. It doesn't dig or move much dirt at all. It rides over the ground and skims the surface flat. Say your drive needs a crown, so rain runs off the sides instead of pooling. A box blade's adjustability is what gets you there.

Pasture edges and cleared ground take the same grading a driveway does. Grading doesn't stop at the driveway. A box blade handles pasture edges, ground cleared around a barn or shop pad, and rough spots left behind after stumps or brush get cleared. The blade and side plates move dirt and knock down high spots the same way whether you're working a drive or an open pasture corner. A grader's no different — once the big dirt work is done, it finishes rough or uneven ground into a flatter surface, pasture or pad alike. On Tomball acreage, where wet loam leaves plenty of ruts and uneven patches, both tools earn their place outside the driveway.