J5 TractorsIt's AlwaysWorth TheDrive to J5

Box Blades & Graders in Vidor, TX

Box blades and graders for Vidor, TX come from our Buna store.

Call Buna: (409) 994-3522Browse Implements

Box Blades & Graders for Vidor

From Vidor, FM 105 runs north to U.S. 96, the highway the store sits on. Vidor is six miles east of Beaumont, in western Orange County. The county's terrain is generally level and low, surfaced by loam over clayey subsoils. Level, low ground doesn't shed water on its own, so a drive or a pad needs a little grade. A box blade gives it one. Mahindra builds a box scraper, and we carry IronCraft and Modern Ag implements at Buna too.

A box blade or grader smooths your driveway, fills in ruts, and levels dirt roads on your place without hiring extra help. These implements hook up to most brands of tractor. A box blade cuts dirt, carries it, and spreads it back out in one pass. A grader's different. It rides over the ground to shave the high spots and fill the low ones. Use either one to level a gravel drive, build up a pad site, or keep a pasture road smooth after a rain. Match either one to the tractor you've already got. Browse our implements on j5tractors.com to see what fits your place.

  • Grades a driveway or dirt road without hiring outside help.
  • Fills in ruts and low spots so water drains instead of pooling.
  • Cuts, carries and spreads dirt in one pass across your place.
  • Works a gravel pad, pasture road or barn lot into level ground.
  • Fits most brands of tractor.

Browse Implements

The J5 store that serves Vidor

The J5 Tractors store in Buna, Texas, seen from U.S. 96, with Mahindra tractors along the front

J5 Tractors Buna

About 26 miles by road from Vidor

35011 U.S. 96 S, Buna, TX 77612

(409) 994-3522

Mon-Fri 8:00am-5:00pm, Sat 8:00am-12:00pm

Carries: Mahindra tractors; Mahindra, IronCraft, Modern Ag Products, Vermeer and Krone implements; Bad Boy, Cub Cadet, Spartan and Warhawk mowers

Directions

Questions people ask

Is a 6-foot box blade too big for a compact tractor?

It can be, depending on the tractor. A box blade has to match the tractor's weight and lift capacity, not just its horsepower. In the packages we put together, a Mahindra 1120 or 2123 runs a 4' box blade. A 1626 runs a 5', and a 4540 runs a 6'. That gives you a sense of how width climbs with tractor size. If you run another brand, compare its size and lift to those. The makers' manuals also call for a ROPS-equipped tractor with the seat belt fastened.

How do I put a crown on a gravel drive?

Grade your edges toward the middle, then smooth it. A crown is a gentle high line down the center, so rain runs off both sides. On level, low ground like western Orange County's, that's what keeps water from standing in the drive. Tilt the box blade with the three-point's leveling arm, or use a rear blade, which angles for this work. Pull loose gravel from each shoulder toward the center. Then make a light finish pass down the middle. Keep the crown gentle, since a steep one is hard to drive on.

Will a box blade level a pasture that cattle have torn up?

It will, once the ground firms up. Cattle cut up gates, feeding spots and trails, most of all when it's wet. A box blade's edge knocks down the hoof-pocked high spots, and the box carries that dirt into the holes. Wait until the ground is moist but firm, since clay packs into the box when it's wet. Clay that's packed into the box just smears instead of filling. Run shallow passes, and you'll keep the sod you've still got.

What's the difference between back-dragging and cutting with a box blade?

Cutting is forward, with the edge biting into the ground. Back-dragging is in reverse, with the blade riding along to smooth and pack. You cut to take down high spots and load the box with dirt. You back-drag to spread what's loose and leave a finished surface. Many box blades have an edge on the back as well, so they work in both directions. Back-drag slowly, and look behind you often. On loam over clay, a back-dragged surface stays firmer and sheds water better than a rough cut.

Can a box blade prep a food plot?

Yes, for leveling and smoothing it. Drop the scarifier shanks to break up the ground and pull out roots and trash. Then level the plot with the edge, so seed lands on an even surface. For a real seedbed, you'll want a disc or a tiller after that. Mahindra builds a disc harrow and tillers. Buyers at our Buna store include deer hunters and cattle ranchers, and a box blade works for both. Ask at the store which tools suit your plot and your tractor.

On our tractors site

Every implement needs the right tractor in front of it. For Vidor, see:

Also serving nearby

Our Buna store serves Vidor, along with nearby Orange, Bridge City, Mauriceville and Beaumont. Orange County splits into Gulf prairies and marshes in its southeastern half and Piney Woods in the northwest. A box blade levels drives, pads and pasture gates on either side. Browse our implements on j5tractors.com to see what's listed.

Our Locations