Loaders & Backhoes in Beaumont, TX
Loaders and backhoes for Beaumont, TX come from our Buna store.
Loaders & Backhoes for Beaumont
Beaumont sits on the west bank of the Neches River, and the county around it runs from cattle range to rice ground to timber. A front loader moves dirt, feed, hay and brush. A backhoe digs post holes, trenches for a water line and the roots of a stump. Either one fits most brands of tractor. Our Buna store carries Mahindra, IronCraft and Modern Ag implements, and Mahindra makes backhoe attachments. Browse our implements on j5tractors.com before you come up.
A front loader scoops, lifts, and carries dirt and debris on your place, while a backhoe digs and trenches for jobs a loader alone can't handle. A loader handles the everyday work: moving dirt, stacking hay, and clearing brush. A backhoe takes on the deeper jobs, like setting posts, digging a pond edge, or running a line to the barn. Both fit most brands of tractor. That's a lot in one hookup. Our parts counter carries pieces for these attachments, and our service department handles repairs when something breaks. You don't have to guess what fits your tractor. Browse our implements on j5tractors.com to find the right attachment for your place.
- Move dirt, gravel, and hay bales without extra trips across your place
- Dig post holes, trenches, and pond edges with a backhoe attachment
- Clear brush and level rough ground with a front loader
- Match a loader or backhoe to your tractor
- Turn to our parts counter and service department after the sale
The J5 store that serves Beaumont
J5 Tractors Buna
About 32 miles by road from Beaumont
35011 U.S. 96 S, Buna, TX 77612
(409) 994-3522Mon-Fri 8:00am-5:00pm, Sat 8:00am-12:00pm
Carries: Mahindra tractors; Mahindra, IronCraft, Modern Ag Products, Vermeer and Krone implements; Bad Boy, Cub Cadet, Spartan and Warhawk mowers
Questions people ask
Are there used loaders or backhoes at the Buna store?
We sell new and used equipment at our Buna store. The used lot changes as units sell and trades come in, so there's no fixed list of loaders or backhoes. Call the store before you drive up from Beaumont and ask what's there. A used attachment has to suit your tractor's mounts, hydraulics and lift, the same as a new one does. Bring your tractor's make and model so you can check that. On any used unit, look hard at the pins, bushings and hoses, since that's where wear shows first.
What upkeep keeps a loader working season after season?
Grease, hoses and pins. Grease every fitting on the schedule in the operator's manual, and don't stretch it on a loader that works daily. Before you start, look over the hydraulic hoses for cracks, rubbed spots and wet spots. Check the pins and bushings for play, because slop in the bucket only grows if you leave it. Keep the tractor's hydraulic fluid at the right level, since the loader runs off it. When something feels off, the shop at our Buna store works on loaders, backhoes and the tractors they mount to. Have the attachment's model ready when you call.
Who handles parts and repairs on a loader after I buy it?
Our Buna store does. The parts counter handles wear parts like pins, bushings, hoses and cylinder seals, and it can order what isn't on the shelf. The shop handles repairs on the loader or backhoe and on the tractor it's mounted to. That holds whether you bought it new or used. If something breaks, note what you saw: where a leak shows, which joint clunks, what the bucket does. Then call the counter or the shop with that. A good description helps the counter find the part before you make the drive.
How do I tell whether a loader suits my tractor?
Start with the tractor, not the loader. A loader has to match the tractor's mounting points, its hydraulic flow and the weight its front axle can carry. A backhoe has to match the rear mounts and the size of the tractor. The brand on the hood matters less, since attachments like these are built for most makes. Write down your tractor's make, model and year before you shop. Think about the job too, because a loader for hay bales and one for dirt work aren't sized alike. Bring those details to our Buna store and compare the attachment's specs against your tractor.
When do I need a backhoe instead of a front loader?
When the job is digging down instead of lifting and carrying. A loader works on top of the ground. It scoops, lifts, carries and pushes. A backhoe works below it, digging post holes, trenches and footings. Lots of places use both, with the loader hauling off what the backhoe digs up. Mahindra says to travel with the loader in the lowest possible safe position, and that's worth remembering on rough ground. If you only dig a few holes a year, a post hole auger may be enough. For a water line to the barn, the backhoe's the tool.
On our tractors site
Every implement needs the right tractor in front of it. For Beaumont, see:
Not in Beaumont? See Loaders & Backhoes across east and central Texas for every town we serve.
Also serving nearby
Our Buna store serves Beaumont and Jefferson County, along with nearby Lumberton, Bevil Oaks and Vidor. There's dirt to move and holes to dig on cattle range, rice ground and timber alike. A loader and a backhoe sized to your tractor handle most of it.
