Loaders & Backhoes in Orange, TX

For everyday chores, the loader. A loader lifts, carries and pushes, so it moves dirt, gravel, brush and hay. A backhoe digs post holes, trenches and footings. If your work is mostly moving material, start with the loader. If you've got a list of holes and trenches to dig, a backhoe saves you a lot of shovel work. Many tractors run both, the loader up front and the backhoe on the back. Think about the jobs you'll do every week, not the ones you'll do once.

The one built for its frame, its hydraulics and its lift capacity. A loader bolts to mounts on the tractor and runs off the tractor's hydraulic system. Loaders and backhoes fit most brands of tractor with the right mounting kit, but the size has to suit your machine. Mahindra's safety guidance warns that a loader throws off a tractor's weight distribution, and that raises the rollover risk. So don't go bigger than the tractor. Bring its make, model and horsepower to our Buna store, and ask what mounts on it.

The used units at our Buna store change as they sell. We sell new and used equipment there, so whether there's a used backhoe in a given week is a question for the store. From Orange, call the store before you make the trip. A used backhoe still has to fit your tractor's mount and hydraulics. When you look one over, check for play in the pins, cracked welds on the boom and weeping cylinders. Ask about the hours it's run, too.

Grease, and a look at the hoses. Grease every pivot on the schedule in the operator's manual. Before you start work, walk around the loader and look for leaks, rubbed hoses and loose pins. Check the tractor's hydraulic fluid too, since the loader runs off it. Watch the bucket's cutting edge, because a worn edge digs poorly and wears the bucket itself. Lower the loader to the ground whenever you park. When something's past grease, the shop at our Buna store handles loader repair.

Yes. Our Buna store's service department handles loaders and backhoes, and the tractors they mount to. The parts counter carries common wear parts like pins, bushings, hoses and bucket teeth, and it can order what it doesn't have. When a cylinder leaks or a joint feels loose, note where it's happening. Then describe it over the phone before you load the machine up. From Orange, a call first makes sense before you make the trip.