Implement Parts in Kirbyville, TX
Implement parts for Kirbyville, TX come from the parts counter at our Buna store, down U.S. 96.
Implement Parts for Kirbyville
Around Trout Creek the land is mostly woodland and pastureland, and that's hard on equipment. Cutter blades hit stumps. Rake tines catch on roots. Box blade edges wear away on every lane they grade. The counter handles common wear parts and can order what isn't on the shelf. Send us a parts request online, and you can skip the drive just to ask about one.
The parts counter carries the belts, filters and wear items that keep your tractor, implement or mower running on your place. Hydraulic fittings, blades and other wear parts are usually the first things to go on equipment that works hard. When something breaks, you don't need a long explanation, you need the part. Tell the counter what you're running and what broke, then ask about the piece you need. A clear description of the problem helps track down the right part. Can't make it in today? Send us a parts request online instead of making the trip. That way your equipment gets back to work instead of sitting parked in the shed.
- Parts for tractors, implements and mowers
- Common wear items like belts, filters and hydraulic fittings for equipment that works hard
- A parts counter that keeps your equipment moving instead of sitting idle
- One counter for tractor, implement and mower parts
The J5 store that serves Kirbyville
J5 Tractors Buna
About 16 miles by road from Kirbyville
35011 U.S. 96 S, Buna, TX 77612
(409) 994-3522Mon-Fri 8:00am-5:00pm, Sat 8:00am-12:00pm
Carries: Mahindra tractors; Mahindra, IronCraft, Modern Ag Products, Vermeer and Krone implements; Bad Boy, Cub Cadet, Spartan and Warhawk mowers
Questions people ask
When does a box blade need a new cutting edge?
When the edge is rounded, chipped or worn close to its bolts. A sharp edge bites into ground. A rounded one rides over it and leaves the high spots behind. Look at the scarifier shank tips too, since they wear down from the point. Many box blades use bolt-on edges and replaceable shank tips, so you swap the worn piece instead of the whole blade. Measure the edge's length, height and thickness and the spacing of its bolts before you order. Gravel wears an edge harder than loam does, but every lane wears one down eventually.
How do I order a part from the Buna counter?
Send a request online, call, or come by. Whichever you choose, start with the implement's model and serial number from the plate on its frame. Without them, finding the right part is near impossible, and a wrong one can go out. Then say what the part does and where it sits on the machine. A photo of the plate and of the worn part helps a lot. If the plate's gone, photograph the whole implement instead. The counter works from what you give it, so more detail means fewer questions back to you.
Which baler parts wear out first?
Belts, pickup teeth, bearings and chains. Belts stretch and crack with hours, and a slipping belt rolls soft or lopsided bales. Pickup teeth bend or break on rocks, sticks and roots, and a baler with missing teeth leaves hay behind. Bearings get noisy or hot before they fail. Chains stretch and need adjusting, then replacing. Look your baler over before first cutting, while there's still time to get a part in. If a part isn't on the shelf, the counter can order it. Bring a broken tooth or a belt measurement so the match is right.
Can I find rotary cutter blades for an older cutter?
Often, yes, if you can tell the counter what the cutter is. Blades come in different lengths, thicknesses, hole sizes and bends, and they have to match the cutter and the way it spins. Read the plate on the deck if it's still there. If it isn't, measure an old blade from end to end, note the bolt hole size and take a photo. Bring the old blade and its bolt if you can. Replace blades as a pair so the cutter stays balanced. A cutter that's run on mismatched blades shakes, and that wears the gearbox.
Do I need to bring my whole implement in for a part?
No. Most parts can be matched from a description, a photo or the old part. Send the request with what the implement is, what broke and what you can read off its plate. Pull the broken piece off and bring it to the counter if it comes off easily. Photos from two or three sides help when it doesn't. A tape measure in one photo shows the size. You'd only need the implement itself if the trouble isn't clear yet, like a noise you can't place. In that case, call the store and describe it before you load anything up.
On our tractors site
The same store handles tractors for Kirbyville too:
Not in Kirbyville? See Implement Parts across east and central Texas for every town we serve.
Also serving nearby
Our Buna store's parts counter serves Kirbyville and nearby Jasper, Newton and Deweyville. Woodland and pasture around Trout Creek keep cutters, blades and hay tools working hard. When one of them needs a part, start with the counter in Buna.
