Implement Parts in Kountze, TX
Implement parts for Kountze, TX come from the parts counter at our Buna store.
Implement Parts for Kountze
Hardin County's pine and hardwood timber and its dense undergrowth are hard on equipment. Cutter blades hit stumps and wrap up vines. Box blade edges grind through sandy loam and red clay. Rake tines bend on roots. The counter handles common wear parts and can order what isn't on the shelf. Send us a parts request online and tell the counter what you're running. The drive can wait until you know what you need.
The parts counter carries the belts, filters and wear items that keep your tractor, implement or mower running on your place. Hydraulic fittings, blades and other wear parts are usually the first things to go on equipment that works hard. When something breaks, you don't need a long explanation, you need the part. Tell the counter what you're running and what broke, then ask about the piece you need. A clear description of the problem helps track down the right part. Can't make it in today? Send us a parts request online instead of making the trip. That way your equipment gets back to work instead of sitting parked in the shed.
- Parts for tractors, implements and mowers
- Common wear items like belts, filters and hydraulic fittings for equipment that works hard
- A parts counter that keeps your equipment moving instead of sitting idle
- One counter for tractor, implement and mower parts
The J5 store that serves Kountze
J5 Tractors Buna
About 25 miles by road from Kountze
35011 U.S. 96 S, Buna, TX 77612
(409) 994-3522Mon-Fri 8:00am-5:00pm, Sat 8:00am-12:00pm
Carries: Mahindra tractors; Mahindra, IronCraft, Modern Ag Products, Vermeer and Krone implements; Bad Boy, Cub Cadet, Spartan and Warhawk mowers
Questions people ask
What cutter parts take the most wear in brush and vines?
Blades, blade bolts and the spindle area. Brush dulls and nicks blades, and vines wrap around the spindle and work into the seal. That's how a lot of gearbox seals start to leak. Shear bolts break on hard hits, which is what they're built to do. Driveline yokes and the tail wheel wear with hours. After heavy cutting, check under the deck for wrapped vines and pull them before they cook into the seal. When you replace blades, do both at once so the cutter stays balanced. Tell the counter the cutter's make and width when you ask.
What does the counter need to find the right part?
The implement's model and serial number, first of all. Look for a plate or a decal on the frame, often near the hitch or on the deck. Without them, the right part is near impossible to find, and the wrong one can go out. Then add what the part does and where it sits. A photo of the plate and of the worn piece makes it clearer. If the plate's painted over or rusted away, photograph the whole implement. Put it all in one request, so the counter can match from that and order what isn't on the shelf.
Can I order baler and rake parts through the Buna counter?
Yes. The counter handles wear parts for balers and rakes, such as belts, pickup teeth, rake tines, bearings, chains and sprockets. Each of those wears a little with every bale. A belt that slips or cracks rolls a soft bale. Bent or broken pickup teeth leave hay lying in the field. A chain that's stretched jumps its sprocket. Go over your hay tools before first cutting, while there's still time to get a part in. If a part isn't on the shelf, the counter can order it. Bring the old piece or its measurements along so the size matches.
Does sandy ground wear parts out sooner?
It can. Sandy loam grit works into moving joints and wears on anything that drags the ground. On a box blade, it grinds the cutting edge and the shank tips. On a cutter, it wears the skid shoes and dulls blades that touch down. Rake tines that ride low wear at the tips. Watch the parts that touch the ground most, and replace them before they wear through to the frame. When one wears thin, the counter can match a replacement from its size or from the plate. Bring the worn piece in so you can lay it beside the new one.
Can I send a parts request from Kountze instead of driving over?
Yes. Fill out the request online with what the implement is, what broke and what's on its plate, and it goes to the counter. Attach a photo if you can. From Kountze, that spares a drive just to ask a question. If a part's hard to describe in writing, call the store and explain it out loud. Or bring the broken piece to the counter next time you're in Buna. Whichever way you go, detail is what matters most. The more the counter knows from the start, the fewer questions come back to you later.
On our tractors site
The same store handles tractors for Kountze too:
Not in Kountze? See Implement Parts across east and central Texas for every town we serve.
Also serving nearby
Our Buna store's parts counter serves Kountze and nearby Silsbee, Batson and Saratoga. Timber, brush and pasture on sandy loam and red clay wear cutters, blades and hay tools down. When something needs replacing, start with the counter in Buna.
