Implement Parts in Silsbee, TX
Implement parts for Silsbee, TX come from our Buna store's parts counter, straight up U.S. 96.
Implement Parts for Silsbee
Hardin County's surface soil is a sandy loam, and sand is hard on steel. Cutter blades, box blade edges and scarifier teeth wear through it. Baler belts and rake tines take their own wear each cutting. The counter handles common wear items and can order the rest. Send us a parts request online with a description and a photo. If the part needs ordering, you'll have saved yourself a trip.
The parts counter carries the belts, filters and wear items that keep your tractor, implement or mower running on your place. Hydraulic fittings, blades and other wear parts are usually the first things to go on equipment that works hard. When something breaks, you don't need a long explanation, you need the part. Tell the counter what you're running and what broke, then ask about the piece you need. A clear description of the problem helps track down the right part. Can't make it in today? Send us a parts request online instead of making the trip. That way your equipment gets back to work instead of sitting parked in the shed.
- Parts for tractors, implements and mowers
- Common wear items like belts, filters and hydraulic fittings for equipment that works hard
- A parts counter that keeps your equipment moving instead of sitting idle
- One counter for tractor, implement and mower parts
The J5 store that serves Silsbee
J5 Tractors Buna
About 16 miles by road from Silsbee
35011 U.S. 96 S, Buna, TX 77612
(409) 994-3522Mon-Fri 8:00am-5:00pm, Sat 8:00am-12:00pm
Carries: Mahindra tractors; Mahindra, IronCraft, Modern Ag Products, Vermeer and Krone implements; Bad Boy, Cub Cadet, Spartan and Warhawk mowers
Questions people ask
After a stump strike, what on the cutter needs a look?
The shear bolt or slip clutch first, then the blades and the blade bolts. A stump strike is what the shear bolt is for, so it often breaks and spares the gearbox. Replace it with the bolt grade your manual calls for, never a harder one. Look the blades over for bends and cracks. A bent blade throws the deck out of balance and shakes it. Check the blade bolts and the carrier too. If the deck still shakes after new blades, have the gearbox looked at.
How should I send a parts request so it's matched right?
Online, with the implement's model and serial number and a photo of the part. The numbers are on a tag or plate on the frame, often near the hitch. Write down what the part does and where it sits. Snap a photo of the worn piece and one of the whole implement. The more you include, the less guessing there is. If the tag is gone, say so, and send extra photos. Then you can pick the part up at the counter in Buna.
Does sandy ground wear cutter blades faster?
Yes. Sand is abrasive, and Hardin County's surface soil is a sandy loam. A cutter set low throws sand through the deck, and it grinds at the blade edges. Box blade edges and scarifier teeth wear from it too. Setting a cutter a little higher keeps the blades out of the dirt, and they'll last longer. Sharpen blades in pairs to keep the deck balanced. When a blade is worn thin or cracked, replace it rather than sharpen it again. You'll want new bolts with it.
Can the counter order a part that isn't on the shelf?
Yes. The counter handles common wear items, and it can order the rest. That goes for blades, belts, bearings and tines alike. Tell us which implement it's for and what broke, and add a photo if you can. Or bring the broken piece up U.S. 96 to the counter. How long an order takes depends on the part, so call the store and ask about yours. Asking about the exact part you need beats guessing.
Does the counter carry loader bucket teeth and cutting edges?
Bucket teeth, cutting edges, pins and bushings are the kind of wear items the counter handles. A loader bucket's edge wears thin from scooping. A backhoe's teeth wear at the tips from digging. Pins and bushings loosen with time, and you'll feel slop in the bucket. Replacing worn teeth before they're gone protects the shanks they bolt to. Tell the counter the make and model of your loader or backhoe, so the part matches. Send us a parts request online if you'd rather not make the drive.
On our tractors site
The same store handles tractors for Silsbee too:
Not in Silsbee? See Implement Parts across east and central Texas for every town we serve.
Also serving nearby
The parts counter at our Buna store serves Silsbee and nearby Kountze, Lumberton, Evadale and Village Mills. Silsbee is where SH 327 meets US 96, and you'll take US 96 to Buna. Pine and hardwood forests dominate Hardin County, with pasture and crop ground among them. Cutters, box blades and hay tools all wear on that ground, and the counter handles their parts.
