Implement Parts in Lumberton, TX
Implement parts for Lumberton, TX come from our Buna store's parts counter, up U.S. 96.
Implement Parts for Lumberton
Brush and vines thrive across Hardin County. The cutters that keep them back wear blades and shear bolts doing it. Hay tools wear belts and tines, and box blades wear their cutting edges. The counter handles common wear items like those and can order the rest. Send us a parts request online, and describe the implement and the part. Or bring the broken piece by, so the counter can match it.
The parts counter carries the belts, filters and wear items that keep your tractor, implement or mower running on your place. Hydraulic fittings, blades and other wear parts are usually the first things to go on equipment that works hard. When something breaks, you don't need a long explanation, you need the part. Tell the counter what you're running and what broke, then ask about the piece you need. A clear description of the problem helps track down the right part. Can't make it in today? Send us a parts request online instead of making the trip. That way your equipment gets back to work instead of sitting parked in the shed.
- Parts for tractors, implements and mowers
- Common wear items like belts, filters and hydraulic fittings for equipment that works hard
- A parts counter that keeps your equipment moving instead of sitting idle
- One counter for tractor, implement and mower parts
The J5 store that serves Lumberton
J5 Tractors Buna
About 20 miles by road from Lumberton
35011 U.S. 96 S, Buna, TX 77612
(409) 994-3522Mon-Fri 8:00am-5:00pm, Sat 8:00am-12:00pm
Carries: Mahindra tractors; Mahindra, IronCraft, Modern Ag Products, Vermeer and Krone implements; Bad Boy, Cub Cadet, Spartan and Warhawk mowers
Questions people ask
Which parts give out first on a rotary cutter?
Blades, and the bolts that hold them. A cutter's blades take every stick and stump they meet, so edges chip and dull. Shear bolts or a slip clutch protect the gearbox when a blade hits something solid. A sheared bolt means the cutter did its job. Gearbox seals can weep oil over time. Skid shoes wear on the bottom, where the deck rides the ground. Look those over before a big day of cutting, so a worn part doesn't stop you halfway through a lot.
What should a parts request include?
Start with the implement's model and serial number, from the tag on its frame. Then add what the part does and where it sits. A photo of the worn part, and one of the whole implement, helps the counter match it. If the tag's rusted or painted over, say so and send the photos anyway. The more you give, the less back-and-forth it takes. You can send all of that from your phone, then pick the part up at the counter once it's in.
Which baler and rake parts wear during hay season?
Belts, bearings and tines wear the most. A round baler's belts carry every bale, and its bearings turn for hours each cutting. A rake's tines flex as they sweep the ground, and some bend or snap. The twine or net wrap parts on a baler wear too. Check the belts for cracks and the tines for bends before first cutting, while there's time to get a part. Ask the counter for those by name, and it can tell you what it has.
Can I bring the broken piece to the counter?
Yes, and it helps a lot. A worn blade, a bent tine or a cracked bushing shows the counter exactly what you need, even without a part number. If the part is still bolted on, a couple of clear photos do much the same job. From Lumberton, it's a run up U.S. 96 to our Buna store. If you can't make the drive, send us a parts request online with the photos instead. Either way, you're showing the counter the part instead of describing it.
Do box blade edges and scarifier teeth wear out?
They do, and they're made to be replaced. The cutting edge on a box blade bolts on, so a worn one comes off without replacing the whole blade. Scarifier teeth wear at the tips from ripping packed ground. Hardin County's surface soil is a sandy loam, and sand wears steel. When an edge rounds over, the blade stops biting and starts riding. That's your sign to swap it. If your edge is reversible, flip it first. Then order the new edge and its bolts together.
On our tractors site
The same store handles tractors for Lumberton too:
Not in Lumberton? See Implement Parts across east and central Texas for every town we serve.
Also serving nearby
The parts counter at our Buna store serves Lumberton, along with nearby Silsbee, Kountze, Bevil Oaks and Beaumont. Lumberton is where US 96 leaves US 69 and US 287 behind, and it's US 96 from there to Buna. Hardin County's pine and hardwood country, with its pasture and crop ground, is hard on cutters, blades and hay tools alike. The counter is there for the parts they wear through.
